AFR 195 identify numbers
#1
Member
Thread Starter
AFR 195 identify numbers
Got an engine with AFR heads i am looking at,,,,, apparently they are 195 intake Eliminator heads. AND still on the motor.
Front markings ar stamped L-98 SM
would these be the 65cc or 75cc chamber heads.
The heads are never run and still new and on a complete engine.
I want to know what the chamber size is so i can make an offer.
Front markings ar stamped L-98 SM
would these be the 65cc or 75cc chamber heads.
The heads are never run and still new and on a complete engine.
I want to know what the chamber size is so i can make an offer.
#2
Member
iTrader: (4)
Join Date: Mar 2004
Location: Honea Path, SC
Posts: 216
Received 15 Likes
on
11 Posts
Car: 1985 Z28
Engine: 383
Transmission: 700R4
Axle/Gears: 10 bolt/3.73
Re: AFR 195 identify numbers
Got an engine with AFR heads i am looking at,,,,, apparently they are 195 intake Eliminator heads. AND still on the motor.
Front markings ar stamped L-98 SM
would these be the 65cc or 75cc chamber heads.
The heads are never run and still new and on a complete engine.
I want to know what the chamber size is so i can make an offer.
Front markings ar stamped L-98 SM
would these be the 65cc or 75cc chamber heads.
The heads are never run and still new and on a complete engine.
I want to know what the chamber size is so i can make an offer.
#3
Supreme Member
iTrader: (14)
Join Date: Nov 2008
Location: Milwaukee
Posts: 2,007
Received 147 Likes
on
121 Posts
Car: 92 Firebird, 77 Trans Am SE, 86 Z28
Engine: 5.7 HSR, T/A 6.6, empty
Transmission: T-5, TH350, T-5
Axle/Gears: 3.08 posi, 3.23 posi, 3.23
Re: AFR 195 identify numbers
Most of us are probably only going to be able to speculate. Might want to contact afr and ask. They have been pretty helpful to enthusiasts.
For the record, my 65cc chamber 180cc were L-98 SM. Probably denotes spark plug angle of L-98 and small chamber size. But again, I'm speculating.
For the record, my 65cc chamber 180cc were L-98 SM. Probably denotes spark plug angle of L-98 and small chamber size. But again, I'm speculating.
#4
Supreme Member
iTrader: (15)
Re: AFR 195 identify numbers
I bought a pre-eliminator set of AFR heads a few years back and IIRC when I called AFR with all the numbers on the heads they really weren't able to tell me anything about them expect the obvious. If you can't pull them to get measurements and volumes I would just be content knowing that they are an AFR head which for a SBC always ranks in the top of the list for head choices. But since those are Eliminator heads they may have better records.
#5
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,741
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: AFR 195 identify numbers
Do you have pictures? Eliminator heads usually have barcode stickers on them.
-- Joe
-- Joe
#6
Member
Thread Starter
Re: AFR 195 identify numbers
Will look today
Thread
Thread Starter
Forum
Replies
Last Post
327_TPI_77_Maro
TPI
13
05-22-2005 04:42 PM