Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

fuel tank sender unit Carby no pump in tank type

Thread Tools
 
Search this Thread
 
Old Feb 12, 2024 | 04:35 PM
  #1  
aussiesteve's Avatar
Thread Starter
Member
10 Year Member
Liked
 
Joined: Oct 2011
Posts: 320
Likes: 6
From: Sydney Australia
Car: 1982 z/28 Right hand drive
Engine: 377 AFR195 750DP Solid cam 10.25:1
Transmission: TH/350 3200 stall spohn conversion
Axle/Gears: 10 bolt 3.42:1 Eaton Trutrac.
fuel tank sender unit Carby no pump in tank type

1982 Z/28 Carby car
takes a no tank in pump sender unit pick up type sender unit,, cant find one anywhere.
only pump in tank type.tank. hawks dont sell the 1982 model units.
Reply
Old Feb 13, 2024 | 10:11 AM
  #2  
dlinger's Avatar
Member
10 Year Member
iTrader: (4)
 
Joined: May 2012
Posts: 300
Likes: 18
From: Laurel, MT
Car: 1984 Z28 HO
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73
Re: fuel tank sender unit Carby no pump in tank type

I used one for an 88 and extended the pickup tube with fuel hose. From what I have seen, this is the only option.
Reply
Old Feb 13, 2024 | 12:57 PM
  #3  
aussiesteve's Avatar
Thread Starter
Member
10 Year Member
Liked
 
Joined: Oct 2011
Posts: 320
Likes: 6
From: Sydney Australia
Car: 1982 z/28 Right hand drive
Engine: 377 AFR195 750DP Solid cam 10.25:1
Transmission: TH/350 3200 stall spohn conversion
Axle/Gears: 10 bolt 3.42:1 Eaton Trutrac.
Re: fuel tank sender unit Carby no pump in tank type

Will do
thanks
Reply
Old Feb 13, 2024 | 01:12 PM
  #4  
RedLeader289's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Oct 2013
Posts: 2,620
Likes: 159
From: Louisville, KY
Car: 1983 Z28
Engine: 385 Fastburn
Transmission: T-5
Axle/Gears: BorgWarner 9-bolt posi, 3.27 gears
Re: fuel tank sender unit Carby no pump in tank type

Yeah I'm about to do the same thing, the actual units are basically impossible to find.
Reply
Old Feb 13, 2024 | 02:22 PM
  #5  
aussiesteve's Avatar
Thread Starter
Member
10 Year Member
Liked
 
Joined: Oct 2011
Posts: 320
Likes: 6
From: Sydney Australia
Car: 1982 z/28 Right hand drive
Engine: 377 AFR195 750DP Solid cam 10.25:1
Transmission: TH/350 3200 stall spohn conversion
Axle/Gears: 10 bolt 3.42:1 Eaton Trutrac.
Re: fuel tank sender unit Carby no pump in tank type

if you do extend the pickup pipe, and join the pipe with a rubber hose, and 2 clamps make sure its an in tank rubber piece of rubber that will not fall apart in fuel..

many rubber types will melt over time in fuel,,, efi hose wont.
just a thought.
Reply
Old Feb 13, 2024 | 02:31 PM
  #6  
Firechicken82's Avatar
Supreme Member
Liked
 
Joined: Aug 2021
Posts: 1,261
Likes: 357
From: CT
Car: 82 TA
Engine: Zz430 clone w a torquestorm blower
Transmission: Magnum f
Axle/Gears: Ford 9 w 4.11
Re: fuel tank sender unit Carby no pump in tank type

I would imagine you could use a fuel line compression fitting and do it all w metal line. This way you don't have to worry about the rubber degrading and not being in the best spot.

it's a bummer, I literally just tossed the one from my 82 4 weeks ago it was original but in great shape.
Reply
Old Feb 13, 2024 | 02:40 PM
  #7  
aussiesteve's Avatar
Thread Starter
Member
10 Year Member
Liked
 
Joined: Oct 2011
Posts: 320
Likes: 6
From: Sydney Australia
Car: 1982 z/28 Right hand drive
Engine: 377 AFR195 750DP Solid cam 10.25:1
Transmission: TH/350 3200 stall spohn conversion
Axle/Gears: 10 bolt 3.42:1 Eaton Trutrac.
Re: fuel tank sender unit Carby no pump in tank type

my car was bought to Australia in 1983/84 and changed to right hand drive.

the people used to do 1 good conversion, show the government and get accreditation to do more. every car after about the first 110 were crappy cut corners conversions.
as long as tthe cars drove and looked correct they sold easy.
20 years later the crappy conversions would start to fall apart, dodgy wireing, dodgy everything.
my car i bought in 1999, looked good but the wireing was a mess,
i finished up changeing the entire harness and gauges.

fuel gauge is vdo germany,, premium units like porsche use,, now i need tank unit to match.
i bought a 1987 fuel pump intank pickup, cut it and modified it to accept the different sender unit and my calculations were a little out,,, gauge is readsing out.

so i will need another unit AND this time i will send the VDO fuel gauge and entire tank unit to a propper instrument fitter to get it all matched up. yes i will extend the pipe like i did on the first attempt.

you can buy the 82 carby units but at over $320 its a bit wild. ,
Reply
Old Feb 13, 2024 | 03:53 PM
  #8  
ACebell's Avatar
Member
Liked
Loved
Community Favorite
 
Joined: May 2023
Posts: 271
Likes: 95
From: The Villages, FL
Car: 1983 Camaro Z28
Engine: Originally LU5, but now Carb'd
Transmission: TH350
Axle/Gears: 323
Re: fuel tank sender unit Carby no pump in tank type

Here's an old thread on how this was solved.
Carb gas tank pickup - Third Generation F-Body Message Boards
I had the same problem, but elected to just install a pusher pump like the L69 equipped cars.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smokefan
DFI and ECM
2
Jul 3, 2012 11:31 PM
mike_23us
Tech / General Engine
2
Jul 15, 2009 04:20 PM
Prime Target
Carburetors
7
Jul 1, 2009 07:08 PM
1988 GTA 383
Engine/Drivetrain/Suspension Wanted
5
Jul 2, 2006 10:04 AM
wendscot
Tech / General Engine
3
Jun 16, 2005 08:16 PM




All times are GMT -5. The time now is 03:59 AM.