Here's my L69 build spec's...
Thread Starter
Member
Joined: May 2000
Posts: 419
Likes: 0
From: Parkersburg, IA, U.S.
Car: Trans Am
Engine: L69
Transmission: T5
Axle/Gears: 3.73
Here's my L69 build spec's...
L69 305 5 speed 3.73 gears 36,000 miles.... any other suggestions?? Thanks kevin
already have flowmaster catback
SLP headers
world sr heads
performer egr intake
comp cams Part #252ah-12
Duration @.050 intake Exhaust lift intake lift exhaust lobe sep
206 212 425 440 112
already have flowmaster catback
SLP headers
world sr heads
performer egr intake
comp cams Part #252ah-12
Duration @.050 intake Exhaust lift intake lift exhaust lobe sep
206 212 425 440 112
Joined: Mar 2000
Posts: 1,692
Likes: 1
From: Corona
Car: 92 Form, 91 Z28, 89 GTA, 86 Z28
Engine: BP383 vortech, BP383, 5.7 TPI, LG4
Transmission: 4L60e, 700R4, 700R4..
Axle/Gears: 3.27, 2.73
Clutch
Brakes
Suspension
That's all that's left, not. But a good place to go.
Brakes
Suspension
That's all that's left, not. But a good place to go.
Thread Starter
Member
Joined: May 2000
Posts: 419
Likes: 0
From: Parkersburg, IA, U.S.
Car: Trans Am
Engine: L69
Transmission: T5
Axle/Gears: 3.73
Well i put a new clucth in it already because i did the 5 speed conversion at 35,000 miles and it only has about 36,000 now.. brakes work fine now that i fixed the rears with the tsb parts.. suspension is gonna get it next... with sub frame conn,controll arms and sway bars and poly bushings. for now.. Im just looking to get it a little faster so maybe low 14's if thats possible.... I hate that almost every car on the road today can put a real hurt on the TA in acceleration.. I think this combo should be a vast improvement.. Kevin
Thread
Thread Starter
Forum
Replies
Last Post
