Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Cruise Control

Thread Tools
 
Search this Thread
 
Old Apr 11, 2002 | 01:30 AM
  #1  
phoenix350's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 159
Likes: 0
From: Illinois
Cruise Control

Recently i removed my cruise control on my 89 formula 350 ( to clean out the engine bay, since I do little driving that would require it.) My question is simple.. of the large hoses that goes to it ( the smaller being a vaccum and i blocked that off) where does that lead too. I have followed it as far as the interior of the car, but is there some sort of vacuum controled switch inside or am i completly off the mark? soon i will remove it completly to be sold on ebay, adn make a nice job of it, but for right now i was just wondering if anyone knows what this hose is for.
Reply
Old Apr 11, 2002 | 10:11 AM
  #2  
Dustin Mustangs's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2002
Posts: 575
Likes: 0
From: MI
Car: I
Engine: Taunt
Transmission: Mustangs
That hose, on my car at least, goes to a vacuum switch that is mounted on the brake pedal. There should be two of them there, one is electrical and is for the brake lights, and the other one is what you describe. Mine was white and had a large nipple pointing towards the driver seat that's home for the hose you describe.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
junior419
TBI
14
Apr 7, 2025 11:35 AM
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM
DiabloWS6
Southern California Area
5
Feb 15, 2016 02:08 AM
DiabloWS6
Engine/Drivetrain/Suspension Wanted
20
Dec 11, 2015 04:12 PM
scottmoyer
Camaros for Sale
3
Sep 7, 2015 07:06 PM




All times are GMT -5. The time now is 12:46 PM.