Theoretical and Street Racing Use this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.

A night of fun

Thread Tools
 
Search this Thread
 
Old Mar 13, 2004 | 03:09 AM
  #1  
Project_1986_TA's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2001
Posts: 734
Likes: 0
From: Seattle, Washington, United States
Car: 1986 Trans Am WS6
Engine: Mild 350 TPI
Transmission: 700R4
A night of fun

Tonight Me and a Buddy of mine went out go to the ***** hangout before the left for the races. We found one open place that didn't have cops or police tape all over the parking lot and drove past in 2nd gear a few times just taunting them. They were leaving so we decided to fallow them. Soon we were in the middle of a huge ***** sandwich (about 50 cars in front and about 15 in back. Including a few crotch rockets) Well me and my buddy decided to break up the bunch and go slow to a light they were turning at and had to stop. We then took the guys behind us on a fun little drive cuz they thought we knew where the others were going. Then we just turned off and fallowed the next bunch of ricers after the ones behind us left. Caught a few lights with different guys and won 3 of 4. The only one i lost to was a Modded silver WRX wich had NOS. We finally decided to take off and go back towards my buddys house and found a stupid riced out turbo charged civic sitting at a light. Pulled up next to him and we both took off slow then i figured he didn't want to race so just cruised on ahead then i hear him go WOT and he gets to my door before i mash it and then he is almost a car ahead then i start realling him in and almost passed him going into 3rd but had to stop for the next light wich changed while we were still moving (about 10MPH) and i threw it into 1st and mashed it and pulled on him HARD and got about 4 car lengths at about 85MPH and i shut it down but he tried to get infront of me and i was like no, so made him get in back by speeding up. He couldn't pull on me when we mash it at the same time.
Sorry its so long, but that was a fun night. Its been a while since i took the bird out to hunt down some ****.
Reply
Old Mar 13, 2004 | 03:15 AM
  #2  
jocww's Avatar
Supreme Member
 
Joined: May 2002
Posts: 1,764
Likes: 0
From: cali
Car: 84z, 65 elcamino
Engine: l69 and a hyped up sbc in the camino
Transmission: t5 m21
Axle/Gears: 373s 411s
good times good times
Reply
Old Mar 13, 2004 | 09:56 AM
  #3  
91gta_tpi's Avatar
Member
 
Joined: Aug 2003
Posts: 223
Likes: 0
From: Kingsport,TN
Car: 91 GTA
Engine: 305 TPI
Transmission: 700R4
Yeah it's always fun to go **** huntin!! Good kills!!
Reply
Old Mar 13, 2004 | 04:59 PM
  #4  
SOLID LIFTER's Avatar
Supreme Member
 
Joined: Apr 2002
Posts: 1,083
Likes: 0
From: HAUNTING THE CHAPEL
Car: '87 Mustang LX
Engine: 5.0
Transmission: T-5
Man, I can't wait for summer to get here.
Reply
Old Mar 13, 2004 | 05:38 PM
  #5  
MAXJEFF's Avatar
Junior Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 32
Likes: 0
From: St. Louis
Car: 92 RS, 95 1500, 91 SHO
Engine: 355 LT1
Transmission: T56
Axle/Gears: 410's
I love messing with ricers. In StL there aren't too many that know what they're doing. Most think that a wing, japanese writing, and 50lbs of vinyl tape make a car fast.
My Crown Vic used to be my Grandma's car, and I love to tell them so after I beat them.
Of course it was a Police car before she got it
Reply
Old Mar 14, 2004 | 02:49 PM
  #6  
phoenix305's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 948
Likes: 0
From: Clearfield,Utah
Car: 1987 IROC, 1989 IROC
Engine: built 305, stock 305 tpi
Transmission: Corvette 700r4, t-5
Axle/Gears: 4.10 posi, 3.08 posi
yeah most of the r**e is pretty slow around here to and they all think they are the fastest things on four wheels cant wait to get the T/A on the road
Reply
Old Mar 23, 2004 | 10:23 PM
  #7  
mdricken's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 523
Likes: 0
From: Marion, Iowa
Car: 92 Camaro
Engine: ZZ4 Crate Engine w/Hot Cam
Transmission: Rebuilt 700R4 with Transgo and MW 3
Axle/Gears: 3.73 Eaton Posi
it is ****ing gay that we cannot say rrice



.... thats all i want to say....
Reply
Old Mar 24, 2004 | 08:33 PM
  #8  
BadBowtie88's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 970
Likes: 0
I love **** hunting. It was fun before running low 14's, can't wait to do it when she starts up this time.
Reply
Old Mar 24, 2004 | 11:28 PM
  #9  
trans_am_ta_84's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 638
Likes: 0
Car: 89 trans am
Engine: 355
Transmission: 700r4
i can't wait for another month or so. my car is coming back totally different

from 305tbi to 350 tbi with cam, heads, intake, headers, cat back, 3.42 posi rear... can't wait for it i miss my car badly. i'm stuck with an 85 blazer rotted to hell with a 2.8 carbed motor with a bad starter and a bad gas tank. sucks so bad
Reply
Old Mar 25, 2004 | 07:41 PM
  #10  
BadBowtie88's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 970
Likes: 0
Originally posted by trans_am_ta_84
my car is coming back totally different from 305tbi to 350 tbi with cam, heads, intake, headers, cat back, 3.42 posi rear... can't wait for it i miss my car i'm stuck with an 85 blazer rotted to hell with a 2.8 carbed motor with a bad starter and a bad gas tank. sucks so bad
First of all, why did you stick with the tbi, secondly why didn't you do it yourself??
Secondly, don't feel bad. I'm in an '88 Chrysler freakin mini van. Why? My normal daily driver was totalled when an idiot tried to cross the highway....I was doing 60....

Last edited by BadBowtie88; Mar 25, 2004 at 07:45 PM.
Reply
Old Mar 25, 2004 | 08:11 PM
  #11  
trans_am_ta_84's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 638
Likes: 0
Car: 89 trans am
Engine: 355
Transmission: 700r4
me and my dad are doing it.. for the mopst part. we aren't doing freeze out plugs and cam bearings. the machine shop is doing them tomorrow, along with a crank.. they need to do alittle crank work because the motor was seized up. so it'll have more stroke, new cam bearings, boiled, cleaning the pistons up and putting new rod bearings. then we are buying rings and doing them ourselves, then i got a set of 305 tpi heads and we're taking the valves out and cleaning them up and putting new seals in.. then it will be ready to go back in.

anyways i kept it throttle body because i like throttle body the best. i don't like carburators and i've yet to experience the tuned port.. i mean i drove a camaro with the 350 tpi motor in it buit it was when i first got a car and i didn't buy it. and besides that i don't really want to spend 500 bucks for the intake alone so i'll stick with my tbi.
Reply
Old Mar 25, 2004 | 10:43 PM
  #12  
JDizzle's Avatar
Junior Member
 
Joined: Feb 2004
Posts: 67
Likes: 0
From: Dallas, TX (home) Edmond, OK (school)
Car: 1988 Camaro Sport Coupe
Engine: 305 TBI
Transmission: 700R4
not tryin to start anything but how is a turbocharged civic considered ****? i mean personally **** is all about cheap body kits and airplane wings and fart cans in my book, but i doubt someone whos sportin a turbo on a civic isnt doin ghetto mods cuz turbo kits arent cheap. anways good kill.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SRKLEGIN
Interior
7
Oct 29, 2015 06:38 PM
Derrick86
Transmissions and Drivetrain
7
Oct 1, 2015 05:12 AM
gord327
Transmissions and Drivetrain
13
Sep 29, 2015 10:18 PM
92projectcamaro
Engine Swap
4
Sep 29, 2015 07:07 PM




All times are GMT -5. The time now is 07:00 PM.