TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

help me to get my car to idle right

Thread Tools
 
Search this Thread
 
Old Apr 16, 2002 | 05:41 AM
  #1  
86IrocZ383's Avatar
Thread Starter
Junior Member
 
Joined: Jul 1999
Posts: 49
Likes: 0
From: Coventry, CT
help me to get my car to idle right

okay, I got the new stroker going this weekend and I can't get it to run well below 1500 rpm. It seems like it wants to roll all the time, it will be at 1500rpm and drop to 750 and back up, sometimes it settles down. I tried to set the Iac and it didn't really work, it would go as low as 1000, but if I give it a quick rev it would rev and die. Also I can be driving, let off the gas and it will roll again and die. Any help would be great.
Reply
Old Apr 16, 2002 | 07:52 AM
  #2  
355formula's Avatar
Junior Member
 
Joined: Apr 2002
Posts: 43
Likes: 0
im not too familiar with tpis yet, but maybe something clogging the fuel from getting to your engine? fuel filter, fuel pump... just my .2 cents
Reply
Old Apr 16, 2002 | 07:26 PM
  #3  
86IrocZ383's Avatar
Thread Starter
Junior Member
 
Joined: Jul 1999
Posts: 49
Likes: 0
From: Coventry, CT
I don't think so everything is basically new, I don't think it has any vacuum leaks but I should take another look.
Reply
Old Apr 16, 2002 | 10:09 PM
  #4  
355formula's Avatar
Junior Member
 
Joined: Apr 2002
Posts: 43
Likes: 0
always double check those bastards. make sure you move them around to, like stretch them and ****. cause sometimes you cant see the crack until its stretched.

good luck
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
specialized
TPI
27
Jun 18, 2022 09:26 AM
Spyder_TheGamer
Tech / General Engine
1
Dec 25, 2015 05:07 PM
Wade787b
TPI
2
Sep 29, 2015 01:15 PM
Armored91Camaro
DIY PROM
3
Aug 12, 2015 09:41 AM




All times are GMT -5. The time now is 05:11 PM.