TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

question about info on a website

Thread Tools
 
Search this Thread
 
Old May 13, 2003 | 09:09 PM
  #1  
88gtagearhead's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2002
Posts: 93
Likes: 0
From: Boston Mass
question about info on a website

http://www.fuelinjection.com/portinj.html

"The 57L injector is sized to deliver approximately 4.83 milligrams of fuel with a 2.5 millisecond pulse or 23.92 lbs per hr at approximately 43.5 PSI."

The quote can be found near the bottom of the page under 'fuel injectors'

Is this true, because i always thought it was 22 lbs?
Reply
Old May 13, 2003 | 10:12 PM
  #2  
mrr23's Avatar
Supreme Member
 
Joined: Oct 2001
Posts: 1,392
Likes: 4
From: orlando, fl usa
Car: 1986 pontiac TA
Engine: 360 HSR
Transmission: 700r4 3300 yank converter
Axle/Gears: 3.27 9 bolt
they are 22# they flow 22# @ 37 psi with the vaccum on. when you floor it, vacuum drops to 0 and pressure goes to 43.5 and jumps to 24# that's why you get an adjustable fuel pressure regulator. that way you can raise the pressure to gain more flow out of them. to a point.
Reply
Old May 14, 2003 | 05:22 PM
  #3  
gta_88_kicks's Avatar
Member
 
Joined: May 2003
Posts: 138
Likes: 0
From: Easton, MA
Car: 1988 GTA
Engine: 355
Transmission: 700 r4
i thought the same thing as gearhead, thanks for clearing that up
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chazman
Tech / General Engine
8
Aug 28, 2018 03:25 PM
Caspar
TPI
24
Jun 19, 2016 11:19 PM
chazman
TPI
0
Aug 22, 2015 02:01 PM
redmaroz
LTX and LSX
7
Aug 16, 2015 11:40 PM
gta power
Exhaust
1
Aug 13, 2015 06:15 AM




All times are GMT -5. The time now is 07:54 PM.