ac delete whats needed???
Thread Starter
Junior Member
Joined: Jan 2003
Posts: 33
Likes: 0
From: Keyport, New Jersey
Car: 89 Iroc
Engine: 5.7 liter (L98)
Transmission: TCI 700r4
ac delete whats needed???
i have an 89 iroc with the L98 5.7 tpi. What i want to know is what do i need to take out the whole ac system. I have seen some people talking about a pully that takes place of the compressor. But i want to have a neet and clean looking delete not just look like i lifted the hood and cut it out with bolt cutters. Does anyone sell a whole kit for everything i will need or am i going to have to buy evrything seperate and second hand????
Junior Member
Joined: Oct 2003
Posts: 39
Likes: 0
From: Houston
Car: C-20
Engine: 260 boat anchor Mexican 350 (crate) TPI (MAF)
Transmission: THM-400 I turn 3500 (which is where my pos engine's power starts droping off) at 80 I need a 4L80-E
Why do you want to get rid of your AC
power?
(with your ac off your compressor is a free spinning pully and has less drag than your tensioner pully due to its size)
or
looks?
(if you hate looking at it then there are alternate belt routings listed somewhere on this forum if you search for them if i find them again ill link you to them)
here is a link to the thread you need
look near the bottom of the thread for routing advice w/out ac
https://www.thirdgen.org/techbb2/sho...hreadid=148813
power?
(with your ac off your compressor is a free spinning pully and has less drag than your tensioner pully due to its size)
or
looks?
(if you hate looking at it then there are alternate belt routings listed somewhere on this forum if you search for them if i find them again ill link you to them)
here is a link to the thread you need
look near the bottom of the thread for routing advice w/out ac
https://www.thirdgen.org/techbb2/sho...hreadid=148813
Last edited by C20T/A; Feb 21, 2004 at 12:28 AM.
TGO Supporter
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
Thread
Thread Starter
Forum
Replies
Last Post
