TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

BATTERY negative wire placement

Thread Tools
 
Search this Thread
 
Old Aug 21, 2004 | 09:30 PM
  #1  
irocnroll89's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 1999
Posts: 629
Likes: 0
From: previously OKINAWA JAPAN,georgia, now new england
Car: 1989 IROC--1989 T/A
Engine: 5.7 TPI in both
Transmission: W/C T-5 in both
Axle/Gears: B/W 3.27 in both
BATTERY negative wire placement

I am puttting in a new ground wire on the 1989 T/A. I need to know where the battery ground wire bolts to the engine. The wire was never installed when i bought the car..... and it is a T/A so the battery is on the "wrong" side of the car, compared to the IROC. Thanks will be installing the new positive wire whilst i wait for the answer. thanks shawn
Reply
Old Aug 24, 2004 | 08:51 AM
  #2  
thunderstick's Avatar
Supreme Member
 
Joined: Jun 2000
Posts: 1,295
Likes: 0
From: VA
Car: '91 Z28
Engine: L98 5.7L TPI
Transmission: 700R4
Axle/Gears: 323's
well i just yanked the engine out of my '91 TOI and the neg batt cable was attached behind the AIR pump or A/C, can't recall for sure, but there should be a bolt hole right in that area. hopefully that helps. for someone who just took it off (last weekend), i don't seem to remember much, but i'm not at home, either, where i can go look at it...

KAM
Reply
Old Aug 24, 2004 | 09:53 AM
  #3  
antoine's Avatar
Senior Member
20 Year Member
 
Joined: Mar 2003
Posts: 851
Likes: 3
From: vacaville,ca
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
it should bolt up on the driver side cylinder head in front.
Reply
Old Aug 25, 2004 | 06:53 AM
  #4  
thunderstick's Avatar
Supreme Member
 
Joined: Jun 2000
Posts: 1,295
Likes: 0
From: VA
Car: '91 Z28
Engine: L98 5.7L TPI
Transmission: 700R4
Axle/Gears: 323's
Originally posted by antoine
it should bolt up on the driver side cylinder head in front.
exactly - what he said.

KAM
Reply
Old Aug 25, 2004 | 05:26 PM
  #5  
DeWynter's Avatar
Member
 
Joined: Sep 2002
Posts: 110
Likes: 0
From: Canada
Mine is on the bottom by the air pump.
Reply
Old Aug 31, 2004 | 09:59 PM
  #6  
formulaman's Avatar
Junior Member
 
Joined: Feb 2002
Posts: 57
Likes: 0
On my 91 bird, it is bolted to the front engine accessory aluminum bracket on the lower driver's side.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
GTAman
Electronics
9
Mar 15, 2019 11:40 AM
Ikes 91Z
LTX and LSX
21
Dec 9, 2015 03:49 PM
Jae992
TBI
3
Aug 27, 2015 09:07 AM




All times are GMT -5. The time now is 07:46 PM.