How much is TPI setup worth?
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 553
Likes: 0
From: Phoenix Arizona
Car: 86 Iroc
Engine: 350 crate
Transmission: built 700r4
How much is TPI setup worth?
I'm getting rid of my TPI setup, and I'm wondering how much I should ask for the parts when selling it. These are the parts I'll be selling, pretty much the entire TPI setup minus the wires.
Plenum = good condition, unported, will be cleaned with oven cleaner
Runners = a few minor dents, do they effect performance much?
Manifold = good condition, will be cleaned with oven cleaner, I have an old EGR, as well as an EGR block off plate
Throttle body = good condition
MAF = screens have been previously removed, so I'm not sure about the condition here, but is has never thrown any codes.
Distributor = new cap/rotor
I won't be selling the wires or sensors, as they are pretty much crap, not salvagable. So, I assume these parts are still worth *something* with out the wire harness, correct?
Should I sell them seperatly for people who need individual parts? about how much should each part be worth being in good usable condition? or should I sell the entire thing as a "set", how much would they be worth as a set?
I have seen "sets" go for around $300-$400, is that the usual asking price?
As for selling, I'll ask around forums and local people I know, if nothing then I'll put it up on Ebay.
Plenum = good condition, unported, will be cleaned with oven cleaner
Runners = a few minor dents, do they effect performance much?
Manifold = good condition, will be cleaned with oven cleaner, I have an old EGR, as well as an EGR block off plate
Throttle body = good condition
MAF = screens have been previously removed, so I'm not sure about the condition here, but is has never thrown any codes.
Distributor = new cap/rotor
I won't be selling the wires or sensors, as they are pretty much crap, not salvagable. So, I assume these parts are still worth *something* with out the wire harness, correct?
Should I sell them seperatly for people who need individual parts? about how much should each part be worth being in good usable condition? or should I sell the entire thing as a "set", how much would they be worth as a set?
I have seen "sets" go for around $300-$400, is that the usual asking price?
As for selling, I'll ask around forums and local people I know, if nothing then I'll put it up on Ebay.
Supreme Member
iTrader: (1)
Joined: Aug 2003
Posts: 1,428
Likes: 0
From: SW Chicago 'burbs
Car: American Iron Firebird
Engine: The little 305 that could.
Transmission: Richmond T-10
Axle/Gears: Floater 9" - 3.64 gears
I sold one with injectors and got $130 + shipping for it on ebay.
Supreme Member
Joined: Nov 2003
Posts: 3,383
Likes: 0
From: surrey b.c. canada
Car: 89 Iroc
Engine: lb9
Transmission: wc t-5
Axle/Gears: 10 bolt 3.08 posi
upper plenum
runners
intake manifold
fuel rail
injectors
fuel injectors connectors
ecm
new maf
distributor cover
smog pump
maf bracket
intake
charcoal canister
charcoal canister bracket
ignition coil
i'm gonna sell this a package on ebay for a 5.7 tpi system off a 89 gta what should i ask for it?
runners
intake manifold
fuel rail
injectors
fuel injectors connectors
ecm
new maf
distributor cover
smog pump
maf bracket
intake
charcoal canister
charcoal canister bracket
ignition coil
i'm gonna sell this a package on ebay for a 5.7 tpi system off a 89 gta what should i ask for it?
Last edited by kretos; Aug 28, 2004 at 09:21 PM.
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 553
Likes: 0
From: Phoenix Arizona
Car: 86 Iroc
Engine: 350 crate
Transmission: built 700r4
oh yea, I forgot, I have fuel rails and injectors as well.
I'll ask $375 to start off with, and see if it goes.
thanks guys!
I'll ask $375 to start off with, and see if it goes.
thanks guys!
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM





