Lowered the Idle, now stumbles from a stop
Thread Starter
Member
Joined: Jan 2003
Posts: 144
Likes: 0
From: Louisville, Kentucky
Car: 1991 Camaro Z28
Engine: TPI 350
Transmission: 700R-4
Lowered the Idle, now stumbles from a stop
First off I know this topic has been talked about a lot but I havent seen any with my situation.
I had another chip burned. The one I had was fine but I wanted my idle to be a little lower. It was at 1000 rpms. So I got the new chip in and the idle is at 650-700 and I can really here my cam in action. (lopping) So now when im at a stop light and I begin to accelerate there is a stumble.
What I done so far:
Lowered fuel psi from 50-45
I had another chip burned. The one I had was fine but I wanted my idle to be a little lower. It was at 1000 rpms. So I got the new chip in and the idle is at 650-700 and I can really here my cam in action. (lopping) So now when im at a stop light and I begin to accelerate there is a stumble.
What I done so far:
Lowered fuel psi from 50-45
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Sep 17, 2020 08:26 AM
mdtoren
Tech / General Engine
0
Aug 16, 2015 05:45 PM