Stealth ram users, how did you mount your coil? Please post pics if possible.

 

run a search and you should find something on this. Its been asked before. I mounted mine upside down under the wiper lip on the passenger side temporarily. Dont have a pic at the moment.

 

Same location as it was on the TPI setup, but I had to make a U-shaped cutout at the base of the coil bracket to clear the HSR's intake runner.

Two hacksaw cuts, then bending the section to be removed made a nice clean break. I used a file to smooth the cut area before installing it.

 

I did the same thing. Seems to work ok. car made it around the block twice.

 

I reused the stock mount but grinded the holes so that I could slid the bracket under the last 2 intake bolts to install it. IIRC, I had no choice on 1 of the holes and I think I also had to grind off some material in the middle of the bracket to clear something on the intake. its been a year so I really dont remember that well.