TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Trouble with SES....

Thread Tools
 
Search this Thread
 
Old May 2, 2005 | 07:45 PM
  #1  
Z28Justin's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2004
Posts: 15
Likes: 0
Car: 1991 Z-28 Camaro
Engine: 305 Tuned Port Injection
Transmission: 700r4
Trouble with SES....

I just started my car today and it started fine, then when it went to drop down to idle it just died. SES light on all the time. I tried driving it down to get it scanned but the light turned off when my car warmed up and was acting fine after that. Also I removed the smog pump one of my friend's thinks that might have something to do with it but it's been working fine until now, any ideas?
Reply
Old May 3, 2005 | 08:22 PM
  #2  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,653
Likes: 309
Scan for error codes while the codes are still in memory. That may be your best hint as to the source of the problem.
Reply
Old May 6, 2005 | 04:23 PM
  #3  
Z28Justin's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2004
Posts: 15
Likes: 0
Car: 1991 Z-28 Camaro
Engine: 305 Tuned Port Injection
Transmission: 700r4
ok this is what I got 34 and 43
MAP voltage is low during ignition turn on and problems with the electronic spark control.
Reply
Old May 6, 2005 | 04:25 PM
  #4  
Z28Justin's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2004
Posts: 15
Likes: 0
Car: 1991 Z-28 Camaro
Engine: 305 Tuned Port Injection
Transmission: 700r4
also the problem has gotten worse I couldn't even drive it down to get scanned.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrbird
Electronics
5
Oct 20, 2015 03:43 AM
Lmancha96
TPI
1
Sep 25, 2015 08:11 PM
HikoriYami
Transmissions and Drivetrain
2
Sep 21, 2015 07:11 PM
BWilcox
Tech / General Engine
1
Sep 20, 2015 12:19 PM
eduardosac
Transmissions and Drivetrain
1
Sep 16, 2015 02:18 PM




All times are GMT -5. The time now is 08:23 PM.