That plate in which the iac sits in..on the bottom of the throttle body...what is that called. Im putting my stock tb back on and i need that gasket so i can take off all my stuff off the holley and transfer it back onto the stock tb. I got stainless bolts from tpiparts.net and they called it a coolant plate?

 

they called it a coolant plate because(if yours is still hooked up) coolant loops out of the intake base and goes through that plate, then over to your heater valve. Warms the air going in. Some people claim its a good thing, most claim its bad. - But yes "coolant plate" would make sense.

 

i was searching advance's site and i couldn't find the gasket if i called it a "coolant plate"....any ideas?

 

advance/autozone/etc should be able to get you a throttle body gasket kit pretty cheap. - I use to have the AZ pn for it when i worked there...then you'll have all new gaskets...

 

The gasket for the IAC housing is included in GP-Sorenson's 963008 throttle body gasket kit.

HTH

 

ahhhh, there's that kit number...

 

got all the gaskets..thanks guys