TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Need new vacuum lines...

Thread Tools
 
Search this Thread
 
Old Jan 20, 2006 | 09:03 PM
  #1  
GTA89's Avatar
Thread Starter
Member
 
Joined: Mar 2005
Posts: 149
Likes: 0
From: Holland
Car: Pontiac Trans Am GTA
Engine: 5.7 350
Transmission: TH700R
Axle/Gears: 3.27
Need new vacuum lines...

Hello TPI-freaks,

I need some new vacuum lines of the TPI.
see the pics..

and i need also a hose, mine is broken..
where can i order these parts ?

see blue arrows..




Reply
Old Jan 20, 2006 | 09:49 PM
  #2  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,653
Likes: 309
Rubber vacuum hose and semi-rigid nylon line can be found at almost any well-stocked parts store. The larger PCV vent tube in your first photo may be a bit more difficult.
Reply
Old Jan 20, 2006 | 10:03 PM
  #3  
firebirdjosh's Avatar
Supreme Member
iTrader: (1)
 
Joined: Oct 2004
Posts: 3,361
Likes: 1
From: Worcester, MA
Car: 86 T/A
Engine: HSR 355
Transmission: 700R4
Axle/Gears: 2.77 posi
I noticed two Autozone's I went to didn't have it, but Advance Auto Parts did. Not sure what's available in your area but its certainly cheap enough if you find it.
Reply
Old Jan 20, 2006 | 10:33 PM
  #4  
GTA89's Avatar
Thread Starter
Member
 
Joined: Mar 2005
Posts: 149
Likes: 0
From: Holland
Car: Pontiac Trans Am GTA
Engine: 5.7 350
Transmission: TH700R
Axle/Gears: 3.27
Originally posted by firebirdjosh
I noticed two Autozone's I went to didn't have it, but Advance Auto Parts did. Not sure what's available in your area but its certainly cheap enough if you find it.

thanks friends !

i will try...
the problem is i don't live in the USA,
so this is hard to find for me...

that's why i wanted a site like ebay.com so that i can order it,
and that they could send me the parts..

but if Vader saying that its almost available anywhere
then i should check again in my area...

Reply
Old Jan 21, 2006 | 09:02 AM
  #5  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,653
Likes: 309
The hard nylon line used for the FPR and EGR can be 4.5mm. The rubber hose used for those should be about the same.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
FormulasOnly
TPI
95
Jul 23, 2018 08:47 AM
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM
timonator
Cooling
1
Sep 30, 2015 12:52 PM
dusterbd
TPI
0
Sep 29, 2015 08:40 AM




All times are GMT -5. The time now is 07:46 AM.