A friend of mine have these injectors for sale. Will they fit my TPI intake?
I know some ford fit Chevy TPI Intake

Ford Racing B-302 30# "Red Tops" 0280150756

Thanks
Olav
__________________
-79 Camaro: SB355 TPI with Haltec,TRW, WP, PST, Wette brakes and products, Revolution, Aeromotive, SS lines

www.cardomain.com/ride/2233875
www.texasgutten.net

 

Find out what they flow ? I am thinking you want around a 22 lb injector ( unless you can change the injector constant in the prom) . Also remeber the ford injectors are rated differently . So factor that into the prom change. Like the 19 lb injecotrs for a ford ....maybe closer to a 21 lb ...by GM's rateing

 

Flow is 30lbs thats about I want. I have Haltec computer. I'm not sure if they fit my intake and fuel rail....... ( tpi injectors are 19lbs on the 305 and 22 on the 350's)

 

I know my friend, I put edelbrock headers on, and a fresh cat, with ford SVO injectors, failed emissions, and couldn't get the car to pass at all, and they were 19 lb/hr ones too. You may want to keep that in mind. If you don't add a cam, more cubes, or use a HSR intake and are making 550 hp, then the stock 22 lb/hr will support you to 450 horses, according to TPIS. Those guys know there ****.