TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

NEED HELP BAD!!!!!!!!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 4, 2000 | 12:52 PM
  #1  
Viper702's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2000
Posts: 15
Likes: 0
From: Las Vegas,NV
NEED HELP BAD!!!!!!!!!!!!

I have a 1986 IROC-Z28 303 TBI.Okay here's the prob.I just put in a new driveline and the car still bang's really hard when I put it in gear,and I also put in a new TPS and my idle still go's up and down bad every time I start it,it seem's ok when it's in gear.Now the new one is I was driving it and it shut down on me like I had turned off the key and now it won't start, that was a long walk home.Whatever happened to the car made all my gage's freak out too i'm at a loss I don't know what to do anymore...
Please Help!!! Thank's Frankie
Reply
Old Nov 4, 2000 | 04:03 PM
  #2  
Viper702's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2000
Posts: 15
Likes: 0
From: Las Vegas,NV
Okay I got it running it was a short under the dash.The idle I still need help on and the putting in gear thing.It's also running to rich which is making it smoke really bad you can smell the gas in the exhaust...Frankie
Reply
Old Nov 4, 2000 | 06:03 PM
  #3  
IrocManiac's Avatar
Member
 
Joined: Apr 2000
Posts: 213
Likes: 0
From: Ok, USA
If your dash is screwed up your computer may be throwing a code and you not know it if your lights are not working. The check engine light may be out and you not know there is a problem. I would get that checked because if you are running in Limp Mode it will make your car run rich. Check it out and keep us informed.

------------------
TPI 305,
Gutted airboxes,
gutted MAF,
K&N filters,
Corvette Servo.
14.9@93mph

"Speed kills, wanna live forever, drive a Ford."
Reply
Old Nov 4, 2000 | 11:11 PM
  #4  
Viper702's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2000
Posts: 15
Likes: 0
From: Las Vegas,NV
I checked the code's and ther are none,and my light is working.I think i'm going to get a new computer there only $75.00.If I do get a new one do I have to get a new prom also?Oh one more thing I called to get a price on some wires an they wanted to know if I have aluminum head's, do you know the answer?Thank's for the post...Frankie

[This message has been edited by Viper702 (edited November 04, 2000).]
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AmpleUnicorn88
Brakes
32
Nov 18, 2015 11:02 AM
3rdgenkindagal
Aftermarket Vendor Review
25
Oct 21, 2015 09:32 AM
L98GTA87
TPI
18
Oct 19, 2015 10:43 PM
dimented24x7
Transmissions and Drivetrain
7
Sep 17, 2015 06:58 AM
gta892000
Electronics
1
Sep 16, 2015 12:40 AM




All times are GMT -5. The time now is 04:13 AM.