A buddy wants my '88 TPI setup for his motor. It has like # 462 or something double hump heads on it. Will the intake bolt up or does he have to drill out the holes or what? Thanks!!

------------------
'91 GTA:
www.fbody.com/members/91WS6GTA

 

He will have to elongate the middle two holes in the intake on each side to bolt up to the "non centerbolt" heads on his engine.

 

Yep, it takes a drill and about 15 minutes to do.

 

THANKS GUYS!


ODB- You're in Belleville? My home town is near Red Bud, IL! I'm at college right now in MO.

------------------
'91 GTA:
www.fbody.com/members/91WS6GTA

 

my dads from red bud and chester area we go down there a couple of times a year maybe we will hook up sometime

------------------
1992 camaro RS
195cc AFR heads with compition port work milled to 58cc
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.65 full roller rockers
497-510 LIFT 214-220 duration
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
Taylor 8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit edelbrock water pump
new best ET 13.5 @104.66
no times with new afr heads hopeing for 12's

 

COOL! Let me know when youre coming down. How do you like the SSM subframes? Hard to install? Later

------------------
'91 GTA:
www.fbody.com/members/91WS6GTA

 

Jeremy,
Yeah I get into Redbud quite often to visit my friend Ronnie White who owns Total Eclipse. He has known me and my Iroc for over ten years. I'm only about 25 minutes away from his shop.
ODB

 

i love my ssm sub frames easy to install get em they stop alot of sqeaks in our cars later