TPI Ignition Upgrade?? need help
Thread Starter
Member
Joined: Feb 2001
Posts: 106
Likes: 0
From: Kutztown, PA
Car: 1989 Firebird
Engine: 5.7 Vortec HSR
Transmission: T-5
Axle/Gears: 9-bolt 3.45
TPI Ignition Upgrade?? need help
Well, Ive got the $$ for a new motor for my '87 GTA lb9 and I wanna upgrade my Ignition system also. But i dont know anything about it. I need i know what components i would need for a full system upgrade.
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Whats wrong with your stock ignition?
------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
an MSD6-AL is a good upgrade with a stock distributor,
or you could also go with a non computer controlled MSD distributor for more control over your timing.
I would go with the MSD distributor, amplifier box (6AL), and a blaster3 coil.
or you could also go with a non computer controlled MSD distributor for more control over your timing.
I would go with the MSD distributor, amplifier box (6AL), and a blaster3 coil.
Joined: Dec 2000
Posts: 2,341
Likes: 151
From: Cincinnati,Ohio
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
don't forget the wires and plugs
------------------
1991 banditt2 #130 of 600
Project 350 Banditt
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
------------------
1991 banditt2 #130 of 600
Project 350 Banditt
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Holley (Annihilator ignition brand) makes a replacement module for your distributor, if you want to check that out. Accel also makes one. MSD's spark module is the old 4-pin coil-in-cap type, which I don't think you have...
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM










