Ok, for the hell of it I hooked back up my stock temp gauge. Sender is in the right head

I also have a autometer phantom gauge in my a-piller with the sender in the left head.

The auto meter reads around 150-160.
The stock read 200-220

I have a Grifin Alum Rad with the larg tubes.
And 2 12inch fans.(only one running when i took it for a ride to see how much off the stock gauge is)

I about ****. Is there actually that much off a temp diff. From one head to the other Or do you think the stock gauge is THAT far off.?

Thanks



------------------
Chris
1992 25th Anniv Z28 W/383 Stroker
536 RWHP 569 FT LBS
(chassis dynoed at Ramsies Perf.)
www.go.to/TPI383

 

What does your CTS say?

 

When my gauge is at the half way mark (220?), my diacom is reading about 195.

------------------
1989 IROC-Z 5.7L
NOS 150HP kit
ProBuilt 700R4, PI Vigilante 2800 stall lockup
Baer Brakes 12" Sport System

 

Glen. I dont have a scann took up and running yet. Im buying a AKM cable and am gona give Craig Moatses software a try Its as close to diacom i found. If I like it Im gona drop #300 for Diacom to get there Cables

I swaped wires 2day and the stock gauge is just that off. at least off alot.

Autometer is more on.