383 Stroker is this a good combo up to 5500
Thread Starter
Junior Member
Joined: Feb 2001
Posts: 50
Likes: 0
From: Enfeild CT USA
383 Stroker is this a good combo up to 5500
I built this motor using forged pistons
Scat crank& rods.52 MM TB and 24 ib injectors. Also SLP siamese runners&Accel
base(portmatched)to bigmouth gaskets.SportsmanII 9.8:1
[This message has been edited by RGS1260 (edited April 20, 2001).]
Scat crank& rods.52 MM TB and 24 ib injectors. Also SLP siamese runners&Accel
base(portmatched)to bigmouth gaskets.SportsmanII 9.8:1
[This message has been edited by RGS1260 (edited April 20, 2001).]
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
It sound pretty good too me, it's almost the same combo I'm currently buildning...
------------------
GTA -89:Free flow muffler,dual 3" HF cats, Edelbrock headers, Vette heads, 1.52 RR 7/16, ZZ-9 cam, Big Mouth, AS&M LTR, !plenum, 52 TB, MSD 6AL, TPIS level V prom, Superior shift-kit and all the minor mods, a AFR 195 headed 383 in the works!! ready May 2001...
http://www.itv.se/tacs/members_cars/m279/m279.html (Swedish Trans Am Club)
------------------
GTA -89:Free flow muffler,dual 3" HF cats, Edelbrock headers, Vette heads, 1.52 RR 7/16, ZZ-9 cam, Big Mouth, AS&M LTR, !plenum, 52 TB, MSD 6AL, TPIS level V prom, Superior shift-kit and all the minor mods, a AFR 195 headed 383 in the works!! ready May 2001...
http://www.itv.se/tacs/members_cars/m279/m279.html (Swedish Trans Am Club)
Thread
Thread Starter
Forum
Replies
Last Post
mhatfield 14
Tech / General Engine
5
Oct 24, 2015 07:48 AM
IMissMy86TA
Auto Detailing and Appearance
27
Aug 31, 2015 08:40 PM