TPS Adjustment
Thread Starter
Junior Member
Joined: Oct 2000
Posts: 21
Likes: 0
From: Coppell, TX
TPS Adjustment
I know this question has been asked a lot, but I am having difficulty with the topic. I have read the tech article and have a few questions.
1. Which terminals do I connect to on the TPS A, B, or C.
2.What should the voltage be at idle.
3.What should the voltage be at WOT?
Thanks for the help.
1. Which terminals do I connect to on the TPS A, B, or C.
2.What should the voltage be at idle.
3.What should the voltage be at WOT?
Thanks for the help.
Senior Member
Joined: Jul 1999
Posts: 994
Likes: 0
From: San Diego, CA
It is A and B, i believe the idle voltage should be around .54. As for the WOT voltage, people have said that anything past a certain percentage is conceived as WOT to the computer. Like 3.80 and above.
------------------
1989 IROC-Z 5.7L
NOS 150HP kit
ProBuilt 700R4, PI Vigilante 2800 stall lockup
Baer Brakes 12" Sport System
------------------
1989 IROC-Z 5.7L
NOS 150HP kit
ProBuilt 700R4, PI Vigilante 2800 stall lockup
Baer Brakes 12" Sport System
Thread
Thread Starter
Forum
Replies
Last Post