Hi guys, Ive got a 350 tpi
When i start it in the morning itll be fine.(rough but stable ) until i put it in gear and itll almost die then come back to life and have a slight hesitation.
Ignition system is intact
Icm is good
dist gear is new
Dist is reshimmed and in spec
new cap and rotor
msd 8.5 wires
All Injectors are over 16 ohms hot.
The curious thing is that im loosing coolant. So im thinking its a vacuum leak coming from bad intake gaskets. Thoughts opinons?
When i start it in the morning itll be fine.(rough but stable ) until i put it in gear and itll almost die then come back to life and have a slight hesitation.
Ignition system is intact
Icm is good
dist gear is new
Dist is reshimmed and in spec
new cap and rotor
msd 8.5 wires
All Injectors are over 16 ohms hot.
The curious thing is that im loosing coolant. So im thinking its a vacuum leak coming from bad intake gaskets. Thoughts opinons?
Senior Member
The first thing is to find out where the coolant is going. Is the oil foamy? Is it dripping on the ground? Any white smoke when warm?
NO outside leaks, oil is perfect.
No smoke at all
No smoke at all
Senior Member
Quote:
No smoke at all
It's gotta be going somewhere. You might want to have the cooling system pressure tested.Originally Posted by fire350tpi
NO outside leaks, oil is perfect.No smoke at all
Cooling system holds 20 psi with no leaks, as of last week