injector part no
Thread Starter
Member
Joined: Aug 2001
Posts: 102
Likes: 0
From: Sydney,NSW,Australia
injector part no
hi could anyone tell me if bosch injector part number 0280150991 work with the tpi 350 ci application i know they flow 24lbs i just want to be 100% sure before ordering new injectors . i hope someone can help me out bye
TGO Supporter
Joined: Jul 1999
Posts: 607
Likes: 0
You can save yourself some money by going with some Ford SVO 24lb injectors. About $200 less than a set of stock Bosch injectors.
------------------
Mike Metzler (Desert86Roc)[*] Check Out:SpeedWorldMotorplex.com[*] Check Out:Chevrolet F-Body Online Part & Illustration Manual[*] www.MetzlerRacing.com
Best ET @ 1250 ft[*] 15.352 @ 91.215 mph (uncorrected)
------------------
Mike Metzler (Desert86Roc)[*] Check Out:SpeedWorldMotorplex.com[*] Check Out:Chevrolet F-Body Online Part & Illustration Manual[*] www.MetzlerRacing.com
Best ET @ 1250 ft[*] 15.352 @ 91.215 mph (uncorrected)
Member
Joined: Oct 2000
Posts: 248
Likes: 0
From: nlr, ar
ditto,
the svo 24# injectors are rated @ 37psi
as the bosch are rated 45psi fuel pressure.
some of the injector models do have different
spray patterns... stream, fan, and mist.
mist is more desirable, then fan. the streams
are for hi flow and fabbed injection methods.
airdeano
the svo 24# injectors are rated @ 37psi
as the bosch are rated 45psi fuel pressure.
some of the injector models do have different
spray patterns... stream, fan, and mist.
mist is more desirable, then fan. the streams
are for hi flow and fabbed injection methods.
airdeano
Thread
Thread Starter
Forum
Replies
Last Post
