running 13's in my IROC
#1
Member
Thread Starter
Join Date: Dec 2001
Location: fairmont WV USA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
running 13's in my IROC
can anybody tell me the best and cheapest ways to get into the 13's with my IROC-Z, i just had a new 350 put in, and i have edelbrock headers, accel 8mm plug wires, 160 degree thermo. and its TPI
#2
ATI Procharger, it's like 3000-4000 (Not exactly sure) but with your mods and the supercharger you should be in 13's
------------------
88 Formula 350 WS6
Upper and Lower SuperRam, 1000 CFM Accel Throttle Body, ZZ4 cam, 24# Motorsport Injectors, Larger Gutted Mass Sensor, Homemade Cold Air induction, PROM by performance resources, MSD 6a box, MSD Distributor, Accel SuperCoil, Taylor 8mm wires, TB Bypass, B&M shift Kit, 160* Thermostat, Flowmaster Muffler
Headers in the mail soon to be installed
------------------
88 Formula 350 WS6
Upper and Lower SuperRam, 1000 CFM Accel Throttle Body, ZZ4 cam, 24# Motorsport Injectors, Larger Gutted Mass Sensor, Homemade Cold Air induction, PROM by performance resources, MSD 6a box, MSD Distributor, Accel SuperCoil, Taylor 8mm wires, TB Bypass, B&M shift Kit, 160* Thermostat, Flowmaster Muffler
Headers in the mail soon to be installed
#3
Member
Join Date: Jun 2000
Location: Croydon, PA, USA
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
SUPERCHARGER ----- TOO FUNNY!
Yea he is right but there are other ways too.
First what gears do you have in the rear??
Second do you have any base track times? This would help since it could save you money in mods.
And third how far into the 13's like 13.9X or 13.2X?
But just from you mod list I would say get a catback system if you don't have one and a aftermarket intake would be 2 things start out with. If you haven't done free mods like port your plenum then do that too.
------------------
89 IROC 350 Auto
MSD 6AL
Custom DUAL Exhaust
Edelbrock Performer 6085 Aluminum Heads
ZZ9 Cam
TPIS Level 5 Chip
And Free mods.
(stock intake, runners and suspension)
13.879 @ 98.90 mph (with 2.77 gears!)
Moderator of http://www.iroczone.com
Yea he is right but there are other ways too.
First what gears do you have in the rear??
Second do you have any base track times? This would help since it could save you money in mods.
And third how far into the 13's like 13.9X or 13.2X?
But just from you mod list I would say get a catback system if you don't have one and a aftermarket intake would be 2 things start out with. If you haven't done free mods like port your plenum then do that too.
------------------
89 IROC 350 Auto
MSD 6AL
Custom DUAL Exhaust
Edelbrock Performer 6085 Aluminum Heads
ZZ9 Cam
TPIS Level 5 Chip
And Free mods.
(stock intake, runners and suspension)
13.879 @ 98.90 mph (with 2.77 gears!)
Moderator of http://www.iroczone.com
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
08-11-2015 03:17 PM