TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

check engine code 36

Thread Tools
 
Search this Thread
 
Old Jul 24, 2008 | 11:12 PM
  #1  
wsalas's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2008
Posts: 2
Likes: 0
check engine code 36

I have a 89 GTA 350. When cold the car idles really bad. Does not die but check engine light pops on with only code 36. When it warms up the car adjusts the idle by itself and runs perfect. Have to fix to get car inspected.
Reply
Old Jul 25, 2008 | 04:20 PM
  #2  
Chrisry1995's Avatar
Junior Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 80
Likes: 0
From: St. Clair Shores, Mich.
Car: 89 Trans-Am
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 2.73
Re: check engine code 36

I found this for you to check-out. Let me know if you need more info. or don't know where or what these parts are.I just did a search for "CODE 36" : Code 36 [/B]MAF sensor burn-off voltage was missing. Check MAF sensor burn-off relay and terminal "D" on MAF*There are two Maf relays one for burn off and one for power.*The power one has heavier contacts for more amperage. It can replace the burn off but not the other way around.*For the $11 az to $14 gm, it good to just replace both. I use the heavier one in both places for ease of trouble shooting.*This Voltage (edit maf burnoff) only happens at key off and for just hot sec.*Won't throw the code till the next start up. So... everytime ya gata unhook battery, to clear the code, then start stop start recheck for C E L
Reply
Old Jul 26, 2008 | 09:30 PM
  #3  
wsalas's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2008
Posts: 2
Likes: 0
Re: check engine code 36

well I went to AZ and bought the two new relays. Good news is I ran around for a couple of hours tonight and no error code. I turned the car off and on several times...... so far so good....... THANKS for keeping her on the street.
Reply
Old Jul 28, 2008 | 09:28 AM
  #4  
Chrisry1995's Avatar
Junior Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 80
Likes: 0
From: St. Clair Shores, Mich.
Car: 89 Trans-Am
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 2.73
Re: check engine code 36

Cool!!!!!
Reply
Old Oct 6, 2008 | 08:14 AM
  #5  
stealth908's Avatar
Member
iTrader: (2)
 
Joined: Oct 2005
Posts: 198
Likes: 0
From: Crestview, Fl
Car: 87 GTA
Engine: tpi 350
Transmission: 700r4
Re: check engine code 36

Where are these 2 relays?
Reply
Old Oct 6, 2008 | 10:17 AM
  #6  
irocz28boy's Avatar
Member
iTrader: (2)
 
Joined: Jul 2007
Posts: 231
Likes: 0
From: Winter Springs, FL
Car: 2000 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 10 bolt 4.10s
Re: check engine code 36

Firewall by the brake booster.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wade787b
TPI
2
Sep 29, 2015 01:15 PM
bradleydeanuhl
DFI and ECM
4
Aug 12, 2015 11:48 AM
mizz0313
Transmissions and Drivetrain
3
Aug 12, 2015 06:45 AM




All times are GMT -5. The time now is 01:02 AM.