The engine harness on my Camaro is burnt in a few spots
Car wont start, so im planning on pulling the harness, id like to throw a new engine harness in there, but no luck finding any new ones.
I suppose I could patch it up, but throwing 20 year old wire back in just doesent seem right especially with all the work of removing the old harness.....

So where can I buy a new harness for my 1990 350TPI IROC?

Or am I stuck repairing what I got, or getting a used harness.

 

painless wiring?

 

Thought painless only had universal harnesses to add TPI to older cars, id like a direct replacement.
If they make a direct replacement, then throw me the part number because I havent been able to find it.

 

http://www.carshopinc.com/advanced_s...arness&x=0&y=0

it doesn't look universal to me... there are two part numbers the only difference is the cheapest one has a 4 foot length while the higher priced one has an 8 foot length from the back of the intake to wherever...


You will also need this one, which controls the charcoal canister and other emissions crap..60312

http://www.painlessperformance.com/w...rchField=60312

 

Hmmm, it might be.
Ill have to call or email Painless tomorrow i suppose. Almost 400$ seems pretty steep though :\

 

60313 is also an emissions harness, but it depends with which wiring harness you'll go with...

well yeah it does seem steep, but you at least have the ease of mind that it's from a reputable company, and that you are getting good quality material... there might be other companies that are reputable by the word of TGO members, so lets see what members have to say... ... I think I might go with this harness when I do my FI conversion... my current carb harness is toast... connectors are all broken and wires are practically peeling.. I guess that's what happens to 23 year old wires..

 

Well I talked to painless, they dont make a replacement harness. They said the TPI harnesses they sell are for adding a tpi motor to an older car.
So im outta luck there :\ lol

 

judgeing from nthe date of this post I don't know wether you resolvd this issue yet but anyway .you did,nt state wether it is the ecm harness alone thats trashed or the main bulkhead connector harness with is usually taped into the ecm harness ,if the ecm harness is all you need go to fuelinjection connection .com , you can get a brand new ecm harness from them for 245.00 delivered or look up on ebay screen name fuelinjectionconnection and visit thiere store you can get one fo cheaper yet ,I bought one from them for my s/10 4.3 tbi for 210.00 delivered