Getting ready to bite the bullet and buy some injectors, car came with 19lb figure I'll need 24lb-45psi range or w/e. Already tried the cheapO route bought some used lt1 24lbs with 60k on em $30. Tried to clean em up http://www.youtube.com/watch?v=VFJlTfHyrUk worked great at 1st, several were spraying poorly or barley 2 were sticking open got em to stop sticking. $40 in cleaner total took several to find a kind that worked and $5 for the switch n syringe. So I decide to run some cleaner thru em one more time before install and now all are sticking open/closed at the start. So I don't trust my DIY cleaned injectors and figure I might as well just get a new set and cut my loses. Unless sticking and unsticking is common.

Anyways looking for some suggestions on injectors, don't need the best just want some decent injectors.

 

I use TrickFlows

http://www.summitracing.com/parts/TFS-89072-1/

they have been great for sequential, but I wouldn't suggest such a large injector for a stock application, and mine isn't stock. Perhaps 24-30lbers