Need clarification on breather
Thread Starter
Member
iTrader: (1)
Joined: May 2010
Posts: 306
Likes: 0
From: Elm City, NC
Car: 87 IROC Z
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Need clarification on breather
Ok, I've got an 87 IROC 5.7 recently acquired. During my cleaning up process, I took the valve covers off to polish. replaced the pcv valve on the left side. I've got aftermarket breather caps that you have to take apart to replace the valve. When I took the right side breather off, I noticed that it has a pcv valve in it also. I didn't think that was required on both sides. Can anyone confirm? I'm not sure I explained this very well.
Steve
Steve
Re: Need clarification on breather
Ok, I've got an 87 IROC 5.7 recently acquired. During my cleaning up process, I took the valve covers off to polish. replaced the pcv valve on the left side. I've got aftermarket breather caps that you have to take apart to replace the valve. When I took the right side breather off, I noticed that it has a pcv valve in it also. I didn't think that was required on both sides. Can anyone confirm? I'm not sure I explained this very well.
Steve
Steve
Thread Starter
Member
iTrader: (1)
Joined: May 2010
Posts: 306
Likes: 0
From: Elm City, NC
Car: 87 IROC Z
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
