88 firebird 350 firebird tpi engne harness on a 88 iroc 350 tpi engine

Reply Subscribe

Thread Tools

Search this Thread

Aug 3, 2011 | 07:30 PM

iroc the 88

Thread Starter

Junior Member

iTrader: (1)

Joined: Aug 2008

Posts: 2

Likes: 0

From: louisville ky

Car: 1988 camaro iroc z

Engine: 5.7 350

Transmission: 700r4

88 firebird 350 firebird tpi engne harness on a 88 iroc 350 tpi engine

Guys I'm looking for a lil help here. I have a 88 iroc with a 5.7 350 in it but the engine harness is chewed to hell. There is a harness on ebay from a 88 firebird with a 350 engine for $200. My question is will it work in my car, or am I better off going and buying a harness from painless for about $600 which I don't have, lol. Any help would be appreciated. Thanks.

Aug 3, 2011 | 11:16 PM

vetteoz

Supreme Member

iTrader: (13)

Joined: Apr 2005

Posts: 7,736

Likes: 14

From: Not in Kansas anymore

Car: 82 Z28

Engine: 383 SP EFI/ 4150 TB

Transmission: T400

Axle/Gears: QP 9" 3.73

Re: 88 firebird 350 firebird tpi engne harness on a 88 iroc 350 tpi engine

Quote:

Originally Posted by iroc the 88

There is a harness on ebay from a 88 firebird with a 350 engine for $200. My question is will it work in my car,

Should be no difference ( in the engine bay at least )
A 305 TPI has same harness and ECM as a 350 TPI ; just the tune on the chip in the ECM is different

Quote:

Originally Posted by iroc the 88

am I better off going and buying a harness from painless for about $600 which I don't have,

Would be better of getting this if going standalone

http://cgi.ebay.com/ebaymotors/TPI-M...Q5fAccessories