Whats up guys. Haven't been on in a while, but I'm about to get my 355 Vortec LT4 Hotcammed full roller back from the machine swap for my V6 to TPI swap, and I need to get the front accessories. I found a guy on craigslist who has the whole set up for $300, but is that a good deal? I found the one bracket for the power steering and alternator on ebay for $96 free shipping, but I still need the others. I was wondering if anyone has or knows the part numbers for the brackets. I plan on running no emissions or smog pump, no A/C. So could I just get away with the power steering and alternator bracket? Thanks for the help guys. Gotta find my build thread and update it with more pictures soon...

10055800 - Secondary Air Injector Pump Bracket.
10105212 - Generator & Power Steering Bracket
for the air pump delete There are 2 different styles gm 10186167 with a large 6 grove pulley or gm 10129569 flat idler.
The a/c delete is Dorman 34157 or gm 10055890
$300 sounds high even if it comes with the alt and a/c bracing You might want to talk him down to the $150-$200 range.

I was thinking $300 was high too...it comes with the A/C compressor but more than likely its R12 so useless. Also didn't come with bolts, but it did have a harmonic balancer that I could have used since the one that came off the 350 from the 99 Silverado cracked when I removed it.

Found all the parts on Summit though, just under $200 minus tax, but I have a $25 off voucher so all in all about $200 shipped to my house for brand new, versus $300 and the gas in the truck to get there and back.

R12 is waay better than 134a. IMO

Well either way R12 or 134a, my car didn't have A/C anyways, I have the C41 standard fan and defrost in my car, not the C60.

300 is high tell him 175 or go to a junkyard