Tpi cam selection
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 2
Likes: 0
From: MD
Car: 89 Corvette
Engine: 355
Transmission: 700r4
Axle/Gears: 3.07
Tpi cam selection
I've got an 89 Corvette and I'm building a mild 355 for street cruising. I was thinking of the Lingenfelter 211/219 cam. I wrote Lunati and their pick for a cam was the 20080721. It's specs are 219/227 .549 .565 112 lsa 106 icl I'm running a mildly ported stock tpi intake, 22# injectors, edelbrock 60879 heads, 1.6 roller tips, and 10.7:1 compression. Any thoughts?? I think the lunati might be a bit much. Trans is a built 700r4 with 2500 stall and 3.07 gear.
Last edited by mdstar2; Mar 20, 2013 at 05:47 PM. Reason: wrong values
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 2
Likes: 0
From: MD
Car: 89 Corvette
Engine: 355
Transmission: 700r4
Axle/Gears: 3.07
Re: Tpi cam selection
How about this way..? Is there a better cam than the lpe 211 for a street setup using the stock but slightly ported tpi intake?
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Tpi cam selection
Building a similar setup, but with a 5 speed.
Went with comps suggestion, 08-501-8, don't have it together yet, so can't reasly say how good it is.
Went with comps suggestion, 08-501-8, don't have it together yet, so can't reasly say how good it is.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
