TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

EGR Solenoid

Thread Tools
 
Search this Thread
 
Old May 19, 2013 | 10:28 AM
  #1  
cmierobf's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 2
Likes: 0
From: Swedesboro/Logan Township, NJ
Car: 1989 Firebird Formula 350
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27
EGR Solenoid

Does anyone know of a source for a new EGR solenoid 89 350 TPI or a way to adapt the LT1 EGR solenoid..? Or looking for a working used replacement EGR solenoid. Mine has multiple intermittent faults based on scanner results; engine starts but quits under cold load in gear. Restarts and code clears most of the time.
Reply
Old May 19, 2013 | 10:48 AM
  #2  
Ransford2987's Avatar
Member
 
Joined: Feb 2013
Posts: 346
Likes: 2
From: Tampa
Car: 1990 IROC-Z/1980 Firebird
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: EGR Solenoid

I don't know anything about the LT1 EGR solenoid, but you can find an 89 Firebird solenoid on ebay or possibly your local parts store. If you don't want to take the gamble on ebay, you can always try Rockauto.com or some other well established online auto part stores.
http://www.ebay.com/sch/i.html?_odkw...enoid&_sacat=0
Reply
Old May 19, 2013 | 12:50 PM
  #3  
82tarecaro's Avatar
Supreme Member
iTrader: (4)
 
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: EGR Solenoid

The LT1 solenoid works in reverse so it will be opened instead of closed and vice versa. Member Jeckylandhyde did a write up on using a Cadillac EGR solenoid. I will find the link.

Last edited by 82tarecaro; May 19, 2013 at 12:54 PM.
Reply
Old May 19, 2013 | 12:52 PM
  #4  
82tarecaro's Avatar
Supreme Member
iTrader: (4)
 
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: EGR Solenoid

Here you go...
I think this also might work for the older cars like the Crossfires. I was going to give it a shot as my solenoid looks like it has seen better days.

http://s9.zetaboards.com/nythirdgen/...7236770/1/#new
Reply
Old Jun 29, 2013 | 10:55 AM
  #5  
actarnoff's Avatar
Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
Re: EGR Solenoid

http://www.ecklerscorvette.com/corve...1985-1990.html
Reply
Old Jun 29, 2013 | 11:32 AM
  #6  
TURBOJOE's Avatar
Junior Member
 
Joined: Oct 2007
Posts: 9
Likes: 0
Re: EGR Solenoid

Originally Posted by cmierobf
Does anyone know of a source for a new EGR solenoid 89 350 TPI or a way to adapt the LT1 EGR solenoid..? Or looking for a working used replacement EGR solenoid. Mine has multiple intermittent faults based on scanner results; engine starts but quits under cold load in gear. Restarts and code clears most of the time.
Napa #CRB 22307
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM
jaridjohn
Exhaust
14
Oct 5, 2015 07:01 AM
djmarch
Tech / General Engine
29
Oct 2, 2015 10:41 PM
meeklay812
Camaros for Sale
1
Oct 1, 2015 03:46 PM




All times are GMT -5. The time now is 09:52 PM.