ten years from now i wanna be rockin my thirdgen
the trusty 350 TPI has worked well in this car since 87 and its time to give it some love
A little love
I'm not here to make 500 hp or spin the thing to the moon
i like the low end grunt i love the fuel mileage
its time to freshen up the motor though

Plan:
Mild port/match the intake plenum runners and base
gasket match the stock 083 heads to the intake
from the top down stock HG's .030 quench height?
not sure correct me if im wrong but stock the pistons sat .025 in the hole?
sealed power hypereutectic flat top pistons with 4 valve reliefs +6cc dish?
stock rods with good bolts
stock crank

this puts me around 10:1 CR i think?

for a cam im thinking
LPE 74211 211/219 .530/.560 112lsa OR
LPE 74219 219/219 .560/.560 112 LSA

1.6 Roller rockers

which cam do you all think would suit my application best?

will also run a 2400-ish stall

what valve springs does every one recommend?

what supporting mods am i missing?

i have hooker shorty's 2.5 crossover into a 3 inch to the back
AFPR already

thinking 21# injectors more? less?