72 vette w/91TPI to 94 LT1 swap
Thread Starter
Member
Joined: Mar 2001
Posts: 323
Likes: 1
From: CLIMAX, GA. USA
Car: 1972 LT1 Corvette
Engine: 350 HO
Transmission: M22 Heavy Duty 4 Spd
Axle/Gears: 336
72 vette w/91TPI to 94 LT1 swap
I have a 91 TPI system installed on my Stringray. What do I have to do to replace with a 94 Camaro LT1 intake? Will I see a performance improvement?
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 2,361
Likes: 1
From: Savannah, GA
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
You can either follow my tech article or send me your LT1 intake for me to mod. Either way it's an awsome mod for an engine that is suffering from the 4500rpm blues.
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 2,361
Likes: 1
From: Savannah, GA
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Originally posted by Sauron91
How much do you charge to mod a LT1 induction to fit an L98 5.7? ;> Also..where's that tech article?
How much do you charge to mod a LT1 induction to fit an L98 5.7? ;> Also..where's that tech article?
bolt pattern, distributor hole and spacer, clearance for the small
distributor, dual billet EGR block off plates, drilling/tapping for coolant
fittings(fittings included), and intake porting for a 58mm TB.
I can also supply the rubber fuel lines to adapt the LT1 intake to your
stock fuel system for an additional $80.
The tech article is at my web site. Here's a link to it direct.
http://members.home.net/millicanga/s...into_a_1st.htm
Thread
Thread Starter
Forum
Replies
Last Post
