T-5 ratios ?
Thread Starter
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
T-5 ratios ?
anyone know what ratios of the gears are in the 84 T-5 trannies ?
and whats over all case length total with bellhousing on them ? and what splines are on intput and output ? 10 and 27 ?
2.8L engine if it matters
thanks
and whats over all case length total with bellhousing on them ? and what splines are on intput and output ? 10 and 27 ?
2.8L engine if it matters
thanks
Junior Member
Joined: May 2002
Posts: 61
Likes: 0
From: Courtenay, B.C.
Car: 91 RS
Engine: 350 TBI
Transmission: 5 speed
Most likely: 2.95, 1.94, 1.34, 1.00, 0.62
Maybe 0.73 5th
Input shaft length - 6.66"
26 Spline input shaft
27 Spline output shaft
Total length (including bellhousing) - 30.578"
Length (not including bellhousing) - 24.288"
Maybe 0.73 5th
Input shaft length - 6.66"
26 Spline input shaft
27 Spline output shaft
Total length (including bellhousing) - 30.578"
Length (not including bellhousing) - 24.288"
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Originally posted by mousemaker
Most likely: 2.95, 1.94, 1.34, 1.00, 0.62
Maybe 0.73 5th
Input shaft length - 6.66"
26 Spline input shaft
27 Spline output shaft
Total length (including bellhousing) - 30.578"
Length (not including bellhousing) - 24.288"
Most likely: 2.95, 1.94, 1.34, 1.00, 0.62
Maybe 0.73 5th
Input shaft length - 6.66"
26 Spline input shaft
27 Spline output shaft
Total length (including bellhousing) - 30.578"
Length (not including bellhousing) - 24.288"
Last edited by Gary Anderson; May 11, 2002 at 02:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM
