What tool do I need, or how exactly do you remove an old pilot bushing out of the crank on a 350? Thanks Guys

 

go to autozone or whatever store you have and see if they have a loan a tool program,

or find a bolt, rod, whatever. its gotta be just small enough to fit,

i believe the haynes manual says, 19/32in fill the pilot bushing, and the recess behind it, with grease, insert the rod, and smack it with a hammer, if you got a good snug fit, it will pop the bushing right out, or so some say, i never done it

hydrualic pressure is an amazing thing