B&M Megashifter

Reply Subscribe

Thread Tools

Search this Thread

Aug 31, 2002 | 04:27 PM

drumike102

Thread Starter

Member

Joined: Aug 2001

Posts: 100

Likes: 0

From: Milford,CT

B&M Megashifter

Anyone who has this shifter can u tell me how u like it and how it was to install? I'm thinking about getting it but wanna know how it is.
Thanx,
Mike

Aug 31, 2002 | 05:33 PM

Riley's35089rs+

Supreme Member

Joined: Nov 2001

Posts: 2,743

Likes: 1

From: heartland

Car: 89rs (previous 2.8)

Engine: 406

Transmission: 700r4 (for now)

Love mine took 6 hrs to install ...no problem

Attached Thumbnails

Sep 1, 2002 | 10:28 PM

Bunker82

Member

Joined: Jul 1999

Posts: 272

Likes: 0

From: Tucson, AZ

Car: '82 Camaro

Engine: 383

Transmission: TH-350

I don't have one but a few nights ago I went through the archives and read what people have had to say about them. Hit the search button and put in "megashifter" and read some of the experiences people have had. Some have had good, some bad. If nothing else there are some good tips people have shared to avoid potential pitfalls.

HTH

Sep 2, 2002 | 12:48 AM

305iroc

Junior Member

Joined: Aug 2002

Posts: 73

Likes: 0

From: Bullhead City, AZ

Car: 91 Z28

Engine: 305 TPI

Transmission: 5 speed

Axle/Gears: 3.42's

I like it

I just installed one in my 88 iroc. It took about 4 hours to install. Well worth it. You have to change the cable bracket on the trans. It comes with a new one. Also comes with a new cable which is three times longer than stock one so you have to make a loop with it above the trans. MAKE SURE YOU AJUST THE CABLE RIGHT. Follow the instructions and you shouldn't have a problem.