How in the world do I get the trans cooling line off of this 700r4?? I can not even see the lines going into the trans!! HELP ME!!

GTAFOX

 

With a tubing wrench to break them loose, and a regular open-end after that.

 

AKA "line wrench". Most parts stores sell them, and 1/2" is the size you need. Are you pulling the tranny? If so, then I remove all the bellhousing bolts, and lower the tranny so that I have room to work on the lines (you'll have to remove the lines from the bracket that bolts to the oil pan so you don't bend and kink them).

 

Will do! The trans is coming out. Thanks guys for your help.

GTAFOX

 

GTAFOX, I think it's really cool hearing from guys my Dad's age! I'm 35 myself... .....just cool, that's all Good luck with your tranny....