I just finished my auto to 5 speed swap (or what i thought to be finished) and im still in the dark.... Everything is done, i just finished bleeding the brake and clutch lines and i lowered the car off jacks. The car will go in gear when off, but when the car is turned on, it wont go into 1-5 and if you try to put it into reverse, it scrapes and wont go either. Could this be a case of air in the hydraulic system, or are there any other things i should check? Any help would be greatly appriciated. Thanks in advance

 

it sounds like your clutch isn't fully releasing. Most likely that's due to air in the hydraulic line.