What drive train set up?
Thread Starter
Member
Joined: Jul 2003
Posts: 144
Likes: 0
From: Colorado
Car: 1989 IROC-Z Camaro
Engine: 5.8L 355
Transmission: T-5 5-speed
What drivetrain set up?
Well I'm building an engine I'm guessing will be between 330-350 hp/3750-400 ft/lbs of torque. I will be replacing my t-5 with a t-56. Now all I need is from the t-56 back. I know I will prolly get an aluminum drive shaft, but I would rather make the differential stronger. What parts should I use with my stock 10 bolt. Can I rebuild the posi and put 3:73's in place of the 3:23's. I was thinking moser 28 spline axles? I don't really know what I"m doing. Thanks for any help!!!!
Tyler
Tyler
Last edited by snowman89; Feb 26, 2004 at 11:11 PM.
TGO Supporter
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
i think with that power and a 6 speed tranny that ten bolt may have some trouble keeping together at least in stock form.
https://www.thirdgen.org/newdesign/t...nguprear.shtml
http://www.ws6transam.org/10bolt.html
3.73's seem to be a great ratio when having a 6 speed.
moser 28 splines would be better than the stock 28 splines, and for posi its up to u and the price ur looking to spend i guess / brand.
https://www.thirdgen.org/newdesign/t...nguprear.shtml
http://www.ws6transam.org/10bolt.html
3.73's seem to be a great ratio when having a 6 speed.
moser 28 splines would be better than the stock 28 splines, and for posi its up to u and the price ur looking to spend i guess / brand.
Thread
Thread Starter
Forum
Replies
Last Post