Im wonder what rear end i have...

3.1 v6

When i peel out normally 1 tire will spin when so my friends say and the tread left on the pavement..but every now and then ill really get into peeling out and i will floor it and both tires will spin i have tread evidence to prove it...I dont have the RPO for a posi

Whats up with my car

 

3:23 open rear ( No Limited Slip) because no one would order a V6 car with one. RPO G80 is the option number. Waste of good tire rubber trying to burnouts,

 

why do they sometimes both spin and sometimes one spin

 

Just like what came first the chicken or the egg. In other words "don't worry about it. It may be the road surface/

 

oh so now when you have a question people just say dont worry about it.... .... ive never heard of that in my life....theres gotta be a reason i thought a non posi rear end only propelled one wheel.... ill just ask on iroczone since this site when down the drain

 

Well sorry you feel that way about the site! I will try to help... It is posible you have a posi. If you have not change you diff fuid in a while pull the cover off and take a look. Then you can know for sure if you have a posi and you give your diff some fresh gear lube! If it not posi it just could be the road suface. Hope this helps a little.

 

thanks man...im putting my car on the lift tommorrow becuase i have to tighten up my exhuast cause it rattles and connect the o2 sensor..(not sure why thats not hooked up) and ill pull the cover off while its up there

 

why don't you go ask on iroczone like you said you were going to do? since this sites went down the drain so much as you say i sure wouldn't be lowering my self to the level of accepting advice from any one here.