stall converter sizing
Thread Starter
Member
Joined: Nov 2003
Posts: 315
Likes: 0
From: upstate new york
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
stall converter sizing
will a holeshot 2400 converter flash too high...past usable torque on a mild-medium performance TPI 350?
(with either the TPIS cam or the lingenfelter L98 cam...
like 280-288 deg. adv. duration, and between .500 and .520" of lift)
i saw a dyno sheet on the tpis cam and it made like 90% of its torque at around 2200-2250 and peaked around 3300 i believe??
(with either the TPIS cam or the lingenfelter L98 cam...
like 280-288 deg. adv. duration, and between .500 and .520" of lift)
i saw a dyno sheet on the tpis cam and it made like 90% of its torque at around 2200-2250 and peaked around 3300 i believe??
Thread Starter
Member
Joined: Nov 2003
Posts: 315
Likes: 0
From: upstate new york
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
also the gear ratio is a 3.42....
is that close to what it should be for a cam that size and converter?
is that close to what it should be for a cam that size and converter?
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
Nov 10, 2015 06:17 AM
