couple questions??
Thread Starter
Member
Joined: Dec 2005
Posts: 104
Likes: 0
From: Warren, MI
Car: 91 firebird
Engine: 305 TBI
Transmission: 5 speed
couple questions??
k first what is the ring bolts supose to be torqued down to?? also when puting a higher gear ratio in does it mess with your spedo? if so whats the cure for this? thanks
Supreme Member
iTrader: (1)
Joined: Jul 2004
Posts: 10,763
Likes: 4
From: Calgary, AB, Canada
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
ring bolts are something like 60ft/lbs with red loctite. Check in your haynes or something to be sure, maybe it was 70ft/lbs.
Use new bolts too, they're cheap.
Yes, your speedo will be off, you'll need a new speedo gear. Talk to the guys at your local stealership, the gear is about $11.
Use new bolts too, they're cheap.
Yes, your speedo will be off, you'll need a new speedo gear. Talk to the guys at your local stealership, the gear is about $11.
Thread
Thread Starter
Forum
Replies
Last Post