can't remember what these are for....
Senior Member
Joined: Sep 2003
Posts: 892
Likes: 0
From: Mo.
Car: Z/28
Engine: 355
Transmission: Turbo 400
Axle/Gears: 3.73
Re: can't remember what these are for....
Top pic is the factory torque arm mount thats is bolted to the back of the transmission.
The bottom pic is the exhaust hanger that is bolted to the otherside of the trans directly opposite of the torque arm mount. It supports the cat/converter.
The bottom pic is the exhaust hanger that is bolted to the otherside of the trans directly opposite of the torque arm mount. It supports the cat/converter.
Thread Starter
Member
Joined: Nov 2004
Posts: 285
Likes: 0
From: California
Re: can't remember what these are for....
would my 700r4 equipped 87 iroc have these same items + the torque arm?
Supreme Member
iTrader: (1)
Joined: Apr 2000
Posts: 5,321
Likes: 4
From: Northern CA.
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Re: can't remember what these are for....
All 3rd gens had a torque arm from the factory.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: can't remember what these are for....
Here's a pic of the torque arm on a T-5. Note the mount at the front of the arm:
https://www.thirdgen.org/forums/atta...what-drive.jpg
The hanger looks shot. Take a look at the fix:
https://www.thirdgen.org/forums/exha...ger-fix-p.html
JamesC
https://www.thirdgen.org/forums/atta...what-drive.jpg
The hanger looks shot. Take a look at the fix:
https://www.thirdgen.org/forums/exha...ger-fix-p.html
JamesC
Thread
Thread Starter
Forum
Replies
Last Post