Clutch pedal/linkage bushing
Thread Starter
Joined: Aug 2006
Posts: 12,812
Likes: 110
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Clutch pedal/linkage bushing
Just some info.
For those of you, who like me, could not find the little plastic bushing that holds the hydraulic clutch push-rod to the pedal.
I found the part in a package at the auto part store, the ones with the big "HELP!" written on the top, made by Motormite. Part # 14041. comes with the clip and a few other parts, costs like 5 bux. I assume its the same clip for all the years.
For those of you, who like me, could not find the little plastic bushing that holds the hydraulic clutch push-rod to the pedal.
I found the part in a package at the auto part store, the ones with the big "HELP!" written on the top, made by Motormite. Part # 14041. comes with the clip and a few other parts, costs like 5 bux. I assume its the same clip for all the years.
Senior Member
iTrader: (7)
Joined: Dec 2007
Posts: 618
Likes: 0
From: Williamstown, NJ
Car: '98 Mustang GT
Engine: '03 4.6L
Transmission: T45
Axle/Gears: DK
Re: Clutch pedal/linkage bushing
That is what I need. I somehow dropped and lost the plastic bushing! I did check the Motormite/Dorman website, but #1401 doesn't bring up the plastic bushing.
Last edited by Rich2279; Aug 7, 2008 at 08:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
