i need some help.

i just put an edelbrock 1405 performer carb and performer intake on my 86 305 camaro. but there is no tv cable hookup on the throttle linkage of the new carb.

tci sells an Edelbrock® carburetor TV Cable geometry corrector kit part number 376710

and a 700R4 & 2004R Carter® AFB™, Quadrajet™, Edelbrock® TV Cable Bracket part number 376700

if i buy these parts i should be able to hook up my tv cable correctly right??

do i really need the second part, the bracket, or can i use my stock one??

any help would be appreciated thank you

and here is a link to the tci site

http://www.tciauto.com/Products/gm/gm_4L60E.asp

 

The stock bracket will mount the TV cable too far forward. I believe I've tried that particular bracket you mention. It works best with a thick carb gasket, but you might have trouble using the vacuum break port on the back of the carb, or on manifolds.

 

other companies sell the same product it seems to correct this problem,

transmission center

http://www.transmissioncenter.net/highperf700r4.htm

# 29 on list is the geometry corrector that bolts to throttle linkage

fourthgearinc

http://fourthgearinc.com/700_R4_Street_Rod.htm

phoenix trans

http://phoenixtrans.com/html/tvcablekits.html

so i need the edelbrock carburetor TV Cable geometry corrector kit part number 376710

and the bracket and a 700R4 & 2004R Carter® AFB™, Quadrajet™, Edelbrock® TV Cable Bracket part number 376700

???

i just wanna drive my **** man i just put all this new crap on!!!


just did msd 6 al ignition, msd pro billet dizzy, msd wires, msd blaster, the intake, the carb, k&n filter, headers, y pipe, cat back.... i wanna drive it man!!1

 

.

 

oight son thanks

 

http://www.bowtieoverdrives.com/cata...php?ITEMID=213

don't forget the 10$ throttle bracket that bolts on.

 

i just bought this from tci


Code
Product
Quantity
376700
700-R4/200-4R TV Cable Bracket - Quadrajet™
376710
TV Cable Corrector Kit for Edelbrock



you just mentioned another bracket for 10$, but that link you linked me to a 120$ kit
----------
http://www.bowtieoverdrives.com/cata...BCAT&CATID=WA4

is a list of the 10$ adapters i think you are talking about. how do i know which to buy? my car has no cruise or anything...
----------
it says those brackets work with their EZ kits only

 

ya i was refering to the kit and the bracket, before you bought your stuff.

interested to see that bracket from tci.

EZ kits are considered some of the best you can buy. even if you don't buy their products, spend a few hours reading their articles on how the TV system works, you'll learn a ton...i did.

 

oight son, i'll look into that

 

guess, ill dig up an old thread.....will this fit on my edelbrock 1406?
http://store.summitracing.com/partde...700+4294865279

 

that fits on the intake manifold, and yes you need it. you also need the bracket that attatches to the carb arm. i think the technical term edelbrock calls the bracket is a "geometry corrector" so that the tv cable hooks onto the carb, and the geometry is more similar to stock