salve to master cyl clutch plastic hose
Thread Starter
Junior Member
Joined: Mar 2005
Posts: 36
Likes: 0
From: northern oakland county mi
Car: 84,89,00,02 t/as 71vette sierra
Engine: 310,350,383,383
Transmission: bw t5, trem t5, hurst 6 spd
Axle/Gears: 4.10, 3.42, 3.73, 3.73
salve to master cyl clutch plastic hose
where to find. mine got a little warm from my headers and caused a leak. according to gm this hose is no longer available as a seperate part. you have to buy a complete slave and master cylinder clutch kit for 220.00. does anyone sell an after market hose for this application?
Junior Member
iTrader: (3)
Joined: Apr 2006
Posts: 36
Likes: 0
From: Hickory, NC
Car: '84 Z28, '86 IROC
Engine: 305, 406
Transmission: T5, Super T10
Axle/Gears: 3.23, 4.10 Posi
Re: salve to master cyl clutch plastic hose
they sell adapters so you can use a braided AN-4 line
something like this
http://store.summitracing.com/egnsea...5&autoview=sku
of course you'll be over $100 dollars but you'll never melt one again
i'm not 100% sure this is the one you need cause i just looked it up fast, but i'm pretty sure i used these exact ones (these are the only adapters like this i could ever find). i used them on an 82 Grand Prix i put a T5 in because i melted the original plastic line on the headers.
something like this
http://store.summitracing.com/egnsea...5&autoview=sku
of course you'll be over $100 dollars but you'll never melt one again
i'm not 100% sure this is the one you need cause i just looked it up fast, but i'm pretty sure i used these exact ones (these are the only adapters like this i could ever find). i used them on an 82 Grand Prix i put a T5 in because i melted the original plastic line on the headers.
Last edited by redcattaro; Sep 23, 2008 at 04:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
camaro1185
Engine/Drivetrain/Suspension Parts for Sale
4
Oct 26, 2015 06:51 AM
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 2, 2015 04:17 AM
