in a few weeks i will be putting in 4.10's and then after that put the 6 speed in. but since the gear shop will already have the car i was wondering what i can have them to to make it stronger?

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

weld the axle tubes to the center section, use a girddle and braces.

------------------
ICON Motorsports

1st & 3rd
MM Black Diamond 538 F&AM

 

Don't forget the solid pinion spacer instead of the crush sleeve!

Tim

------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's with bigger cam, bigger stall, and bigger exhaust.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org