You MUST c&p to see the picture www.koolmeister.com/set2.jpg What's so special about that? Count the teeth and notice that everything is brand new!.

If you are on the mailing list, you will finally be getting an email from me by early next week (as I will be out of town until Monday).

Miles

------------------
88 427 Camaro
12.18 @ 113mph 1.75 60ft
Currently installing 3.73's into my 9 bolt (YES,it is a 9 bolt & YES they are 3.73's, not 3.70. 4.1's to follow soon )
www.koolmeister.com

[This message has been edited by 88 427 Camaro (edited August 09, 2001).]

 

Cool, Cool, COOL!!!!

 

thank the lord. my 9 bolt is about to take a crap

 

sweet now i can pick the weeds off of my 9-bolt that is laying out back with a broken pinion gear, and get it back in action!!

please put me on the mailing list as well

thanks


------------------
87 IROC-z 305 TPI 5spd 10-bolt 3.73 posi ,8.8 Accel wires , bosch platinum +4 plugs,MAF sensor screens removed, gutted air box, ram air, K&N air filters,TB coolant bypass ,polyurethane tranny and torque arm mounts, K&N oil filter,Mobil 1 synthetic oil 20w50, futura GLS super sport tires 265/50/15 rear and 235/60/15 front mounted on 86 monte carlo SS rims ,

400 sbc and a 6 spd in the works

 

hey miles
will ring con up and let him know that the stuff arrived ..has taken a longtime BUT should be easier now

 

If possible please put me on the list as well. Thanks

maksik7@mailcity.com

 

Steve,

No worries, eh?

Miles

 

kream@kscable.com
add me please

 

I just git a used 3.27 rear, might need to see the 3.70 limlight.

------------------
86 T/A 5.0 A4 & 2.77 gear
15.62 @ 86 mph
93 Civic 1.6L
13.5 @ 100 mph

 

How soon will we get info on prices?

------------------
89 IROC-Z 350 TPI

-Flowmaster Catback
-Performance Resource Chip
-700R4 (Rebuilt) Too much done to actually list
-K&N Airfilters
-Ported Plenum
-2.77 Gears (not much to brag about but eh, its there)
-MSD 8.5 mm plug wires
-Gutted cat
-!AIR
-Gutted Air Boxes

 

I am also interested. I could not access the website to look at the photos. Need help I guess!!!

------------------
Best ET 14.413 @95.57 without
pulling valve covers or manifolds.
Also with stock 2.77 rear end!!!

 

Alright, I finally sent out an email last night to everyone on the mailing list. If you did not get the email, send me an email and I will put you on the list.

I have 5 sets of new series 3 carriers and 5 sets of 4.10 gear sets for b/w 9 bolt.

Miles

------------------
88 427 Camaro
12.18 @ 113mph 1.75 60ft
Currently installing 3.73's into my 9 bolt (YES,it is a 9 bolt & YES they are 3.73's, not 3.70. 4.11's to follow soon )
www.koolmeister.com

 

looks like you may need more parts miles .....dont think those ones are going to last long

 

Put me on your list dude.

 

Put me on your list too.

------------------
1987 IROC w/T56 and a 383 TPI in the works

 

Add me the the list. I have 9 bolts rearend all over the farm.

Rick

 

Could you please put me on your list...... I have been waiting months for any info. I have sent you many emails and you have not responded. If it isnt too much trouble could you put me on your list!!!!!!!!

 

Please add me to your list also.

Tim

 

I apologize to anyone that has not received an email from me about the availablility of 9 bolt parts. I have tried to add everyone to the list that has sent me an email, but obviously not everyone has received it. If you did not receive the email earlier this week, PLEASE send me another email and I will add you to the list again. Below is a copy of the email(s) I sent out. I know that this is not a for sale board, but I do want everyone to know that 9 bolt parts are now readily available and a viable option to a 9 inch or 12 bolt in some situations.
Miles

Below is a copy of the email I sent out. I can get other ratios too (3.4x, 3.9x, 3.73 & 3.2x). If you want the complete setup (carrier, gears and install kit) it is $795. Just a carrier and gear set is $695, just a carrier is $475 and just a gear set is $325.

You are receiving this email because you requested to be on the mailing list for 9 bolt parts. If you do not want to be on this list, please let me know. Ok, I finally have some good information. It is getting late, so this will be short (sorry, but I do have a day job). I have some 9 bolt parts available. It took a long time, but finally things have worked out. This is what I currently have (these are brand new): 5 - 4.10 gear sets 5 - series 3 carriers There are two different styles of 9 bolts, the 0575 and the 0578. There are interchangable via the use of an ~.085 spacer under the pinion. I am also working on additional performance stuff for the 9 bolt, and will keep you updated. For the people interested in gears for series 2 carriers, there probably will not be any, sorry. There is talk about a spacer, but it is only talk right now. For a carrier, it will be $475 and will include the carrier (new series 3), new rear cover gasket and a new pinion seal. For a 4.10 gear set, it will be $325 and will include the new 4.10 gear set, pinion nut & crush sleeve and the ~.085 pinion shim, new rear cover gasket, and a new pinion seal. For an install kit, it will be $145 and will include carrier bearings and races (Timmken), pinion bearings and races (Timmken), ring gear bolts, gear marking compound, shims, pinion seal and install instructions. I should be able to get more parts before too long, but there is no promise on when or how much they will be then. Four gear sets and 4 carriers will be available to the people in the order that you contacted me (going back to last spring). The other gear set and/or carrier may end up on ebay in coming weeks (I already have new stuff in my car ). Miles




------------------
88 427 Camaro
12.18 @ 113mph 1.75 60ft
Currently installing 3.73's into my 9 bolt (YES, it is a 9 bolt & YES they are 3.73's, not 3.70. I currently have 4.10 gear sets and new series 3 carriers in stock for 9 bolts )
www.koolmeister.com